Cirrus-logic CDB5484U Manuel d'utilisateur télécharger pdf (Page 5)

CDB5484U

DS919DB5 5

1. HARDWARE

1.1 Introduction

The CDB5484U evaluation board provides a convenient means of evaluating the CS5484 energy mea-

surement IC. The CDB5484U evaluation board operates from a single USB or 5V power supply. An op-

tional 3.3V power supply input is available for powering the CS5484 directly. The evaluation board

interfaces the CS5484 to a PC via a USB cable. To accomplish this, the board comes equipped with a

C8051F342 microcontroller and a USB interface. Additionally, the CDB5484U GUI software provides

easy access to the internal registers of the CS5484. The software also provides a means to display the

on-chip ADC performance in the time domain or frequency domain.

1.2 Evaluation Board Overview

The board is partitioned into two main sections: analog and digital. The analog section consists of the

CS5484, passive anti-aliasing filters, and a high-voltage section with attenuation resistor networks. The

digital section consists of the C8051F342 microcontroller, LCD, test switches, reset circuitry, and USB in-

terface. The board also has a user-friendly power supply connection. The assembly information and de-

fault configurations for jumpers are shown below.

Figure 1. CDB5484U Assembly Drawing and Default Configuration

1 2 3 4 5 6 7 8 9 10 ... 46 47

Pas de commentaire

Cirrus-logic CDB5484U Manuel d'utilisateur Page 5