Cirrus Logic CS485 Spécifications télécharger pdf (Page 22)

C E N T A U R U S P R I M E

MB Reg 10011 (DI) "Damper Forced Closed " Fld: 0 NORMAL (0-state)

MB Reg 10012 (DI) "OCC/UNOCC Mode Ctl " Fld: 0 OCCUPIED (0-state)

MB Reg 10013 (DI) "Local SPT Status " Fld: 16 DISABLED (1-state)

MB Reg 10014 (DI) "Min Setpoint Forced " Fld: 0 NORMAL (0-state)

MB Reg 10015 (DI) "Max Setpoint Forced " Fld: 0 NORMAL (0-state)

MB Reg 10016 (DI) "Temp/Flow Mode FB " Fld: 64 TEMP (1-state)

MB Reg 40004 (AO) "Occupied Heating SPT " Fld: 71 ==> 71.00

MB Reg 40005 (AO) "Occupied Cooling SPT " Fld: 76 ==> 76.00

MB Reg 40006 (AO) "UnOccupied Heating SPT" Fld: 67 ==> 67.00

MB Reg 40007 (AO) "UnOccupied Cooling SPT" Fld: 80 ==> 80.00

MB Reg 40011 (AO) "Max Heating Flow SPT " Fld: 16 ==> 16.00

MB Reg 40012 (AO) "Min Heating Flow SPT " Fld: 15 ==> 15.00

MB Reg 40013 (AO) "Max Cooling Flow SPT " Fld: 90 ==> 90.00

MB Reg 40014 (AO) "Min Cooling Flow SPT " Fld: 25 ==> 25.00

MB Reg 40015 (AO) "Fan Ctl Offset SPT " Fld: 3 ==> 3.00

MB Reg: 10 (DO) "Damper Forced Open CTL" Fld: 0 OFF (0-state)

MB Reg: 11 (DO) "Damper Forced Close CTL" Fld: 0 OFF (0-state)

MB Reg: 12 (DO) "OCC/UNOCC Mode CTL" Fld: 0 OCCUPIED (0-state)

MB Reg: 13 (DO) "Local SPT Control " Fld: 16 DISABLED (1-state)

MB Reg: 14 (DO) "Min Setpoint Forced " Fld: 0 NORMAL (0-state)

MB Reg: 15 (DO) "Max Setpoint Forced " Fld: 0 NORMAL (0-state)

MB Reg: 16 (DO) "Temp/Flow Mode CTL " Fld: 0 TEMP (0-state)

MB Reg: 17 (DO) "Recalibration CTL " Fld: 0 OFF (0-state)

The display is slightly different for the BACnet flavor of this gateway, because BACnet

uses Object Type/Instances rather than registers. The order is slightly different, but

the data is identical. Here is the same display, in “BACyap” format:

PNT: (S)elect, (A)ll, (D)etail, (X)-it :A

DEVICE #1 is field device/subdevice/type 4/0/1

TagID: "VAV #4, TRUNK 1 (Dev #1)", has 54 objects under it, 1st one at: 54

BACnet ID 1 (AI) "Zone Temperature " Fld: 72 ==> 72.00

BACnet ID 2 (AI) "Active Heating SPT Used " Fld: 71 ==> 71.00

BACnet ID 3 (AI) "Active Cooling SPT Used " Fld: 76 ==> 76.00

BACnet ID 104 (AO) "Occupied Heating SPT " Fld: 71 ==> 71.00

BACnet ID 4 (AI) "Occupied Heating SPT Val" Fld: 71 ==> 71.00

BACnet ID 105 (AO) "Occupied Cooling SPT " Fld: 76 ==> 76.00

BACnet ID 5 (AI) "Occupied Cooling SPT Val" Fld: 76 ==> 76.00

BACnet ID 106 (AO) "UnOccupied Heating SPT" Fld: 67 ==> 67.00

BACnet ID 6 (AI) "UnOccupied Heat SPT Val" Fld: 67 ==> 67.00

BACnet ID 107 (AO) "UnOccupied Cooling SPT" Fld: 80 ==> 80.00

BACnet ID 7 (AI) "UnOccupied Cool SPT Val" Fld: 80 ==> 80.00

Cirrus Logic CS485 Spécifications Page 22