Cirrus-logic CRD5378 Manuel d'utilisateur Page 6

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 64
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 5
CRD5378
6 DS639RD2
1. INITIAL SETUP
1.1 Kit Contents
The CRD5378 reference design kit includes:
CRD5378 reference design board
USB cable (A to mini-B)
Software download information card
The following are required to operate CRD5378, and are not included:
Bipolar power supply with clip lead outputs (+/- 3.3 V @ 100 mA)
PC running Windows 2000™ or Windows XP
®
with an available USB port
Internet access to download the evaluation software
1.2 Hardware Setup
To set up the CRD5378 reference design hardware:
Verify all jumpers are in the default settings (see next section).
With power off, connect the CRD5378 power inputs to the power supply outputs.
J26 pin 17 = -3.3 V
J26 pin 19 = +3.3 V
J26 pin 20 = 0 V
Connect the USB cable between the CRD5378 USB connector and the PC USB port.
Proceed to the Software Setup section to install the evaluation software and USB driver.
Vue de la page 5
1 2 3 4 5 6 7 8 9 10 11 ... 63 64

Commentaires sur ces manuels

Pas de commentaire