Cirrus-logic AN359 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Cirrus-logic AN359. Cirrus Logic AN359 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 4
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
Copyright Cirrus Logic, Inc. 2011
(All Rights Reserved)
http://www.cirrus.com
Application Note
EMI Filter Modifications when
Replacing L6562 with CS1501
1. Introduction
The Cirrus Logic CS1501 PFC controller is designed to match industry standard critical conduction mode (CRM)
power factor correction (PFC) controllers, with minimal change to conventional designs. This note summarizes the
changes required in the EMI filter circuit of a 120W power supply (PSU), when a ST Microelectronics L6562 PFC is
replaced with a Cirrus Logic CS1501 PFC controller.
2. Overview
When replacing the L6562 PFC controller, care must be taken to ensure the EMI signature is not compromised. Dif-
ferent PFC controllers operate at different frequencies and in different operating modes, requiring EMI filters with
different impedance profiles. An example of maintaining EMI signature when converting from the L6562 to the
CS1501 is described here. For the purpose of simplicity, we will consider only the PFC portion of the PSU circuit.
Cirrus Logic Application Note AN349 gives complete instructions on how to replace the L652.
3. Filter Structure
Figure 1 illustrates the components in an EMI filter for a PFC boost using ST Microelectronics L6562.
Figure 1. EMI Filter for a 120W PSU with an L6562 Analog PFC Controller
C
IN
+
Q
B
PFC
CONTROLLER
L
B
R
NTC
R
NTC
CM
Choke
DM
Choke
Y-CAP
Y-CAP
FUSE
C1
C2
C3
L1
C4
L2
C5
C
F
AC
X-CAP
X-CAP
X-CAP
V
DC_IN
AN359
JUL’11
AN359REV1
Vue de la page 0
1 2 3 4

Résumé du contenu

Page 1 - Replacing L6562 with CS1501

Copyright  Cirrus Logic, Inc. 2011(All Rights Reserved)http://www.cirrus.comApplication NoteEMI Filter Modifications whenReplacing L6562 with CS15011

Page 2 - 4. Test Results

AN3592 AN359REV1Table 1 lists the circuit components that influence the EMI filter’s impedance profile. Table 1. EMI Filter Components4. Test Results

Page 3 - 5. Changes to the EMI Filter

AN359AN359REV1 35. Changes to the EMI FilterThe following changes were implemented to create an EMI filter optimized for operation with the CS1501:- T

Page 4 - 7. Reference

AN3594 AN359REV16. SummaryFilters ease the design and qualification process of a PSU by suppressing EMI. The adaptation of an EMI filter tooptimize pe

Commentaires sur ces manuels

Pas de commentaire