Cirrus-logic AN232 Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Cirrus-logic AN232. Cirrus Logic AN232 User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 7
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
1
Copyright Cirrus Logic, Inc. 2003
(All Rights Reserved)
http://www.cirrus.com
AN232
AK5393 to CS5361/81 Conversion
by Kevin L Tretter
1. Introduction
The CS5361 and CS5381 are complete analog-to-digital converters for digital audio systems. They per-
form sampling, analog-to-digital conversion and anti-alias filtering, generating 24-bit values for both left
and right channels.
The CS5361 and CS5381 offer some unique advantages over the AK5393 including:
- Over 70% REDUCTION in package size (TSSOP)
- 50% less power consumption
- 192kHz sampling capability
- Overflow detect
- Integrated level shifters
- Over 65% less group delay (48kHz output sample rate)
- External components consume less board space (See Section 2)
Table 1 shows a comparison of the key specifications of these three devices.
Table 1. Comparison of Key Specifications
AK5393 CS5361 CS5381
Conversion (Bits) 24 24 24
Dynamic Range (A-weighted) dB 117 114 120
THD+N dB -105 -105 -110
Analog Core Power Supply (VA) V +5.0 V +5.0 V +5.0 V
Digital Core Power Supply (VD) +3.3 V to +5.0 V +3.3 V to +5.0 V +3.3 V to +5.0 V
Digital Interface Power Supply (VL) N/A +2.5 V to +5.0 V +2.5 V to +5.0 V
Maximum Power mW 680 161 348
Maximum Sample Rate kHz 108 200 200
Package
28-pin SOP 24-pin SOIC/TSSOP 24-pin SOIC/TSSOP
JUL ‘03
AN232REV1
Vue de la page 0
1 2 3 4 5 6 7

Résumé du contenu

Page 1 - 1. Introduction

1Copyright Cirrus Logic, Inc. 2003(All Rights Reserved)http://www.cirrus.comAN232AK5393 to CS5361/81 Conversionby Kevin L Tretter1. IntroductionThe

Page 2 - * Resistor may only be

AN23222. Typical Connection DiagramsFigure 1. CS5361 Typical Connection DiagramFigure 2. CS5381 Typical Connection DiagramFILT+AINL+AINL-VD0.01µFA/D

Page 3 - Calibration

AN2323Figure 3. AK5393 Typical Connection DiagramVREFLAINL+AINL-V0.1A/D CONVERTERAK5393AINR+AINR-VCOML10µF+RSTVA D+5V10µF+5V to 3.3V10µF++SDATACALRes

Page 4 - 4. Offset Calibration

AN23243. Pin CompatibilityTable 2 shows the pins of the AK5393 and the corresponding pins of the CS5361/81. Please note that theAK5393 has 28 pins, an

Page 5

AN2325A system calibration can then be performed by first running the CS5361 or CS5381 with the high passfilter enabled (HPF = LOW) until the filter s

Page 6 - CS5361/CS5381

AN2326Figure 4. Single-Ended to Differential Input Buffer8.2 Fully Differential Input BufferFigure 5 shows a fully differential analog input buffer.

Page 7

AN2327Contacting Cirrus Logic SupportFor all product questions and inquiries contact a Cirrus Logic Sales Representative. To find one nearest you go t

Commentaires sur ces manuels

Pas de commentaire